Recovering silver from smart textiles with ALS2

Smart textiles combine conventional fibres with sensors, conductive yarn and electronic connections. Silver-coated stitching thread is often used to carry signals between wearable devices, heating elements and textile sensors. When these garments reach end of life, the silver-bearing thread remains mixed with polyester, cotton, elastane, dyes, adhesives and small electronic components, making conventional recovery difficult.

Using ALS2 to recover silver from conductive stitching thread in smart textiles offers a promising alternative to conventional acid-based refining. Ikoi S.p.A.’s project develops acidless separation technology for recovering precious metals from electronic waste and WEEE recycling streams. Backed by the European Union’s Horizon 2020 research and innovation programme, ALS2 is intended to support safer, cleaner and more compact precious-metals recovery plants.

Australia provides a practical setting for evaluating this application. Imported wearables, connected garments and other electronic products create a growing but fragmented waste stream. Rather than treating conductive textiles as a niche problem, recovery specialists could integrate them with established e-waste pathways and create a traceable source of recycled silver for industrial, jewellery and investment markets.

Aspect Conventional acid-based refining ALS2 project approach
Core treatment Dissolves metal-bearing material using strong acids Uses an acidless separation stage within a controlled recovery process
Chemical burden Requires corrosive leaching agents, neutralisation and acid-resistant equipment Avoids reliance on conventional mineral-acid leaching, although other utilities and consumables remain necessary
Main operational risks Chemical exposure, corrosive spills, hazardous fumes and acid-bearing wastewater Lower corrosive-acid burden, with controls still needed for dust, electrical items, process water and solid residues
Feedstock requirements Often suited to concentrated, relatively homogeneous mineral feed Can accommodate mixed streams when suitable sorting and pre-processing are applied first
Plant footprint May require large tanks, leaching areas, neutralisation and effluent treatment Designed around compact, modular precious-metals recovery facilities
Environmental profile Can generate significant chemical waste and sludge Potentially reduces chemical waste while requiring responsible water, energy and residue management
Recovery objective Produces metal or metal compounds for further refining Recovers a precious-metal-bearing fraction that may still require assay-based finishing

The recovery challenge in conductive thread

Silver in conductive stitching thread is frequently a thin coating rather than a solid metal core. The fibre may be coated, plated or combined with conductive polymers, and its silver loading can vary considerably between suppliers and garment types. X-ray fluorescence screening and laboratory assays are therefore essential before a mixed textile batch enters a recovery line.

End-of-life garments can also contain batteries, Bluetooth modules, heating contacts, elastic conductors and laminated electronics. Those items can contaminate the silver-bearing fraction and create fire risks during shredding. Reliable pre-processing must remove batteries and obvious electronic assemblies, open seams and separate conductive thread from ordinary textile waste without losing fine metal-coated fibres.

The economic challenge is significant because silver represents only a small proportion of garment mass. Collection, sorting and transport can cost more than the initial value of the recovered metal. A viable operation therefore needs consistent volumes, reliable assays and a low-cost route from retailers, manufacturers or collection points to a secure processing facility.

How the acidless process works

A sensible recovery pathway begins with source segregation. Conductive garments should be identified before they enter the general textile waste stream, separated from batteries and electronics, then cut or shredded under fire-safe conditions. The resulting material can be processed to liberate conductive yarn and concentrate the silver-bearing fraction.

ALS2 can then provide an acidless separation route for that prepared feedstock. The important distinction from conventional hydrometallurgical refining is the removal of the mineral-acid leaching stage, where highly corrosive solutions create worker-safety, equipment and effluent burdens. ALS2 is being developed to help precious-metals recovery plants operate with a smaller chemical footprint and more compact infrastructure.

The recovered silver fraction would still need quantitative analysis and appropriate downstream finishing to meet a required purity. Metal accounting, residue testing and mass-balance calculations are especially important when the feed contains several grades of conductive thread. Claims about recovery rates should therefore be based on controlled trials using representative Australian feedstock rather than laboratory samples selected solely for high silver content.

Designing an Australian feedstock chain

Municipal e-waste networks in Sydney, Melbourne, Brisbane and other Australian cities already handle batteries and small electronic products. A dedicated intake for connected garments could use those established logistics, provided textile operators receive clear instructions on identifying smart garments and isolating any embedded energy-storage devices. Universities, medical institutions, industrial workwear providers and outdoor-equipment brands may offer concentrated initial volumes.

Transport distances make local or regional recovery attractive. Compact facilities could be located near collection hubs in metropolitan areas, reducing freight costs and the need to ship low-value mixed textiles across the country. Regional facilities could aggregate bales before treatment, although fire prevention, secure storage and battery controls would be essential under Australian conditions.

Partnerships between garment brands, textile recyclers, e-waste processors and accredited laboratories would help create the missing supply chain. Brands can support take-back schemes and disclose the presence of conductive components in product design. Recyclers can preserve the value of silver-coated yarn, while laboratories can independently verify feedstock composition, process performance and residue safety before commercial claims are made.

Safety, regulation and market fit

Reducing acid use does not remove regulatory obligations. Australian operators must address workplace exposure, hazardous chemicals, electrical fire risks, dust control, noise, wastewater and solid residues under applicable state and territory rules. Federal workplace-health and safety requirements, including Safe Work Australia guidance, remain relevant wherever dismantling or shredding takes place.

Cross-border movement also requires care. Customs clearance alone does not establish permission to import waste or used electrical equipment, and Australia’s Waste Import and Export Prohibition Act imposes strict controls on waste shipments. Exporting mixed textile waste or processed residues may be prohibited or subject to case-by-case federal assessment. Any pilot involving overseas material should therefore confirm waste classification and permits before samples move.

The commercial case is stronger when recycled silver has documented provenance. Australian silver markets include industrial buyers, jewellery businesses, bullion suppliers and investment products, while primary silver is associated with lead and zinc mining in places such as Broken Hill in New South Wales and Mount Isa in Queensland. Verified recycled material can diversify supply and support brands seeking measurable circular-economy outcomes, provided chain-of-custody and residue standards are maintained.

Closing the loop on silver recovery

Commercial viability depends on more than silver recovery alone. A credible project would measure kilograms processed, silver recovery, product purity, energy demand, water use, chemical consumption and the destination of every solid residue. It would also compare the capital and operating requirements of a compact ALS2 installation with conventional acid-refining equipment.

A successful Australian demonstration would combine representative conductive-thread feedstock, safe pre-treatment, an independently verified ALS2 trial and a route to accredited refining. This would position the technology as part of an integrated precious-metals recovery system rather than an isolated chemical process.

The immediate action is to convene an Australian pilot with an accredited laboratory, a documented feedstock stream and independently verified recovery data. Its results will determine whether conductive thread can move from a difficult waste fraction to a credible source of circular silver.