Recovering platinum from thermopile sensors in infrared detectors
Infrared detectors are found in thermal imaging equipment, gas analysers, industrial controls, medical instruments, security systems and everyday appliances. Inside some of these devices, thermopile sensors convert infrared radiation into an electrical signal. Selected sensor designs and associated detector components may contain platinum, platinum-group metals or other valuable alloys that can be recovered when equipment reaches the end of its service life.
The opportunity is technically important, although platinum is rarely present as a large, easily visible part. It may occur in thin films, contact materials, wire elements, coatings or specialised temperature-sensing assemblies. The right recovery strategy therefore depends on identifying the sensor construction, separating it from surrounding materials and concentrating the valuable fraction before refining.
For Australian recyclers, this issue sits within a growing e-waste stream. Equipment retired in Melbourne laboratories, Sydney commercial buildings, Perth mining operations and regional service workshops can contain small quantities of precious metals. Acidless separation offers a pathway for recovering these resources with reduced reliance on corrosive reagents and a stronger focus on material efficiency.
Where platinum may be found in infrared detector assemblies
A thermopile is made from multiple thermocouples connected in series. When infrared energy heats the sensing junctions, the temperature difference produces a measurable voltage. Common thermopile materials include semiconductors, nickel-based alloys, bismuth, antimony and silicon-based structures. Platinum is not present in every thermopile, so recovery begins with accurate identification rather than an assumption that all infrared sensors contain a valuable platinum load.
Platinum can appear in specialised thermocouple elements, electrode materials, contact points, thin-film structures or nearby detector components. Some high-temperature, chemically resistant or highly stable instruments use platinum alloys because they maintain performance under demanding conditions. Infrared equipment designed for industrial process control, spectroscopy or scientific measurement may therefore have a different material profile from a low-cost domestic sensor.
The sensor itself is usually surrounded by a package that includes ceramic, glass, polymers, copper, aluminium, solder and a printed circuit board. The package may also contain gold, silver, palladium or nickel. These materials complicate dismantling but increase the potential value of a carefully separated precious-metal fraction. A recycler should treat the thermopile as part of a mixed technical assembly until its composition has been confirmed.
Why identification and concentration matter
The quantity of platinum in an individual infrared detector is generally small. Manual recovery from one sensor is unlikely to be economical, particularly when labour, transport and testing are included. Commercial viability is more likely when recyclers aggregate a consistent stream from laboratories, electronics manufacturers, instrument maintenance companies, hospitals or industrial users.
Sorting is the first practical control. Infrared detectors should be separated from ordinary circuit boards, general copper-bearing scrap and low-value plastic housings. Product labels, technical datasheets, manufacturer information and component markings can help identify sensor types. Visual inspection may reveal ceramic packages, fine wires or plated contacts, but appearance alone cannot establish platinum content.
Laboratory testing is essential before selecting a refining route. X-ray fluorescence can provide a rapid screening result for some surface concentrations, while fire assay, inductively coupled plasma analysis or other validated methods may be needed for representative bulk samples. Sampling must account for the uneven distribution of precious metals. A handful of visibly metallic components cannot reliably represent a full batch of thermopile sensors.
Once the feed has been tested, mechanical dismantling and size reduction can help liberate the sensor from its housing. Controlled separation may produce a concentrated metallic or ceramic fraction, while plastics and ferrous materials are directed to separate recycling streams. Dust capture, enclosed processing and appropriate personal protective equipment are important because electronic assemblies can contain fine particles and hazardous substances.
Acidless separation for a cleaner recovery route
Conventional precious-metal refining often relies on strong mineral acids or other aggressive chemicals. These processes can create hazardous fumes, contaminated liquids and additional treatment requirements. For a small, complex feed such as infrared detector components, the environmental and operational burden of chemical refining can be disproportionate to the recovered metal.
Ikoi S.p.A.’s acidless separation approach is designed for precious-metal recovery from electronic waste and WEEE streams without depending on conventional acid dissolution. The relevant process configuration will vary with the feed, but the underlying principle is to prepare and separate material in a way that supports recovery while reducing corrosive chemical use. This can be particularly useful where sensor components are mixed with recoverable metals, ceramics and engineering plastics.
A suitable process may include controlled dismantling, physical preparation, concentration and selective treatment of the valuable fraction. The exact sequence should be determined by the sensor’s construction, platinum grade, associated metals and required output specification. Platinum recovery should never be treated as a generic procedure applied identically to every detector.
The acidless model also supports better resource management. Reusable housings, copper-bearing parts and other compatible materials can be directed into their own recycling channels rather than destroyed in a single refining step. This improves the quality of recovered outputs and reduces the volume of residual waste requiring disposal.
Applying the method to Australian e-waste streams
Australia has a dispersed e-waste market, with equipment entering recycling channels through metropolitan collection points, corporate technology refreshes, industrial maintenance and specialist decommissioning. A batch of thermopile-containing detectors may come from a Sydney building-services contractor, a Melbourne laboratory, a Perth mining site or a medical equipment provider operating across several states. Building reliable collection partnerships is therefore as important as the separation technology itself.
Local waste handling requirements also need to be built into the operating model. The Product Stewardship Act 2011 provides a national framework for improving the environmental management of products, while state and territory environment agencies regulate transport, storage and processing activities. Victoria’s e-waste landfill ban is a clear example of a state-level requirement that has changed how unwanted electrical equipment must be managed. Businesses should check current rules for their state, including storage limits, transport documentation and permitted downstream facilities.
Everyday disposal habits influence feed quality. Residents and small businesses may place unwanted electronics in council drop-off services, community collection events or retail take-back schemes, but valuable components can be lost when devices are mixed into general scrap. Clear instructions for separating detectors, control modules and instrument assemblies can reduce contamination. In Australia’s large regional areas, consolidated freight and scheduled collection routes may be needed to make low-volume component recovery practical.
The local market can support specialised recovery because Australia has strong activity in mining, environmental monitoring, industrial automation, building management and scientific services. These sectors use equipment that must operate reliably under heat, dust, vibration or chemical exposure. When such instruments are replaced, their high-specification components may offer a more consistent recovery opportunity than randomly collected consumer electronics.
Building a measurable recovery programme
A credible platinum recovery programme requires traceability from collection through to final material output. Each batch should record its source, equipment type, estimated mass, dismantling method, test results and destination of recovered fractions. This information allows operators to compare yields, identify profitable feed categories and demonstrate responsible handling to equipment owners and downstream customers.
Health, safety and environmental controls should cover every stage. Workers may encounter leaded solder, brominated plastics, beryllium-containing components, mercury in older equipment or residues from industrial use. Safe dismantling procedures, ventilation, dust management, segregation and emergency planning are necessary even when the chosen precious-metal process avoids acids. Acidless does not mean risk-free; it means that a different risk profile and control strategy can be applied.
Economic assessment should include the full material balance. Platinum revenue may be supplemented by gold, silver, palladium, copper or nickel recovered from the same detector assemblies. Reusable plastics and ceramics may have limited value, while contaminated residues may carry a treatment cost. A pilot batch can reveal whether sorting labour and transport are justified before a recycler invests in dedicated equipment.
The most useful performance measures include platinum concentration before and after processing, recovery yield, energy use, water consumption, reagent avoidance, residue volume and the proportion of the original assembly diverted from landfill. These indicators connect technical performance with wider sustainability goals. They also help Australian businesses evaluate whether their recycling contractor can provide verifiable outcomes rather than a broad claim of responsible disposal.
Recovering platinum from thermopile sensors is a specialised application within the wider precious-metal recycling field. The strongest results come from combining sound component identification, representative testing, careful dismantling and a separation route suited to the actual feed. With acidless technology, appropriate compliance controls and dependable collection partnerships, small quantities of valuable metal in infrared detection equipment can become part of a cleaner circular supply chain.
ALS2Project presents a technology platform for organisations assessing precious-metal recovery from electronic waste and WEEE streams. Explore the project’s acidless separation approach, review its applications for compact recovery plants and connect with Ikoi S.p.A. to discuss sensor-bearing feedstocks, testing and pilot-scale opportunities.